Ultra_Compressor Co.,Ltd
    Home
Change to Thai   Change to English US
Language
Ultra Filtration, Filter Elements, Housing Filter

Ultra Filtration LogoFilter Elements & Housing filter

Ultra Filtration offers a one-stop source solution to all compressed air element requirements. We used world recognized supplies of filtration from GERMANY

Ultra filtration, the best quality air treatment products.
  • High flow possibilities
  • 3-5.5 time larger filtration area
  • Higher dirt holding capacity
  • Lower pressure drop
  • Lower maintenance costs
  • Long life times
  • Polyester needle felt max. temp. 120°C

  • Flow Rate 0.8 M/min -150 M/min

    Alternative with : Domnick Hunter, Zender, Ultra Filter, Hiross, Hankison, Orion, Atlas Copco, CTA, Friulair etc…


    To ensure the highest performance efficiency, elements are put to test on our facility which employs a mono-dispersed aerosol to challenge the elements and a near forward light scattering technique to measure and confirm particle retention efficiency.

    All compressed air filter elements are manufactured in accordance with ISO 8573.1:2001 (E)

    Compressed Air Quality to ISO 8573 Part 1:2001
    CLASS Maximum number of Solid Particle per m3 Water Pressure Dewpoint °C IOIL mg/m3
    0.1-0.5 um 0.5-1.0 um 1.0-5.0 um
    1 100 1 0 -70 0.01
    2 100,000 1,000 10 -40 0.1
    3 - 10,000 500 -20 1
    4 - - 1,000 3 5
    5 - - 20,000 7 25
    6 - - - 10 -

    SPECIFICATION :
    SPECIFICATION (standard) X25 (25 Micron) X3 (3 Micron) X1 (1 Micron) XA (0.01 Micron) AC (Activate Carbon)
    Maximum partical size to ISO 8573.1 class 4 3 2 1 1
    Maximum Oil content to ISO 8573.1 class 5 4 2 1 1
    Particle removal 25 micron 3 micron 1 micron 0.01 micron N/A
    Maximum oil carryover at 20°C(68°F) 10 mg/m 10 ppm 3 mg/m 3 ppm 0.1 mg/m 0.1 ppm 0.01 mg/m 0.01 ppm 0.003 mg/m 0.003 ppm
    Maximum temperature 120°C 248°F 120°C 248°F 120°C 248°F 120°C 248°F 25°C 77°F
    Pressure loss-clean & dry 30mbar 0.4psi 0mbar 0.6psi 75mbar 1.1psi 100mbar 1.5psi 75mbar 1.1psi
    pressure oil saturated 50mbar 0.7psi 75mbar 1.1psi 150mbar 2.2psi 300mbar 4.4psi see notes
    pressure loss-change element 400mbar 6psi 400mbar 6psi 400mbar 6psi 400mbar 6psi see notes
    Maximum recommended pressure differential for element change - - 340-400 mbar 5-10psi - - - - - -
    Element end cap HIGH GRADE ALUMINIUM